CTSUSNZ=0, CTSUTXVSEL=0, CTSUINIT=0, CTSUCAP=0, CTSUSTRT=0
CTSU Control Register 0
| CTSUSTRT | CTSU Measurement Operation Start 0 (0): Measurement operation stops. 1 (1): Measurement operation starts. |
| CTSUCAP | CTSU Measurement Operation Start Trigger Select 0 (0): Software trigger. 1 (1): External trigger. |
| CTSUSNZ | CTSU Wait State Power-Saving Enable 0 (0): Power-saving function during wait state is disabled. 1 (1): Power-saving function during wait state is enabled. |
| Reserved | This bit is read as 0. The write value should be 0. |
| CTSUINIT | CTSU Control Block Initialization 0 (0): Writing a 0 has no effect, this bit is read as 0. 1 (1): initializes the CTSU control block and registers. |
| Reserved | These bits are read as 00. The write value should be 00. |
| CTSUTXVSEL | CTSU Transmission power supply selection 0 (0): Select Vcc 1 (1): Select internal logic power supply |